TLP3216 1 2004-1-8 toshiba photocoupler photo relay t l p 3 2 1 6 measurement instruments logic ic testers / memory testers board testers / scanners the toshiba TLP3216 is a super small-outline photorelay, suitable for surface-mount assembly. the TLP3216 consists of a gaas infrared-emitting diode optically coupled to a photo-mos fet and housed in a 4-pin package. its characteristics also include low off-state current and low output pin capacitance, enabling it to be used in high-frequency measuring instruments. features ? 4 pin ssop (ssop4) : 1.8 mm high, 1.27 mm pitch ? 1-form-a ? peak off-state voltage : 40 v (min.) ? trigger led current : 4 ma (max.) ? on-state current : 120 ma (max.) ? on-state resistance : 15
(max.), 10
(typ.) ? output capacitance : 2.0 pf (max.), 1.0 pf (typ.) ? isolation voltage : 1500 vrms (min.) pin configuration (top view) 1 : anode 2 : cathode 3 : drain 4 : drain 1 2 4 3 ? unit: mm 4.2 ? ? ? ? 3.5 0.15 1.8 0.2 0.2 3.8 0.3 1.4 0.46 ? 0.2 2.04 1.27 1.7 jedec eiaj toshiba 11-2a1 weight: 0.03 g
TLP3216 2 2004-1-8 maximum ratings (ta = 25c) characteristic symbol rating unit forward current i f 50 ma forward current derating (ta > = 25c) ? i f /c ? 0.5 ma/c reverse voltage v r 5 v led junction temperature t j 125 c off-state output terminal voltage v off 40 v on-state current i on 120 ma on-state current derating (ta > = 25c) ? i on /c ? 1.2 ma/c detector junction temperature t j 125 c storage temperature range t stg ? 40~125 c operating temperature range t opr ? 20~85 c lead soldering temperature (10 s) t sol 260 c isolation voltage (ac, 1 minute, r.h. < = 60%) (note1) bv s 1500 vrms (note1) : device considered a two-terminal device : pins 1 and, 2 shorted together, and pins 3 and 4 shorted together. caution this device is sensitive to electrostatic discharge. when using this device, please ensure that all tools and equipment are earthed. this device is applying super small package which is free for moisture-proof packing. however, the application of this device is premised on use under controlled environmental condition like as measuring instrument. it is necessary to take precautions of storage condition and operating environmental condition. recommended operating conditions characteristic symbol min. typ. max. unit supply voltage v dd ? ? 32 v forward current i f 10 ? 30 ma on-state current i on ? ? 120 ma operating temperature t opr 25 ? 60 c individual electrical characteristics (ta = 25c) characteristic symbol test condition min. typ. max. unit forward voltage v f i f = 10 ma 1.0 1.15 1.3 v reverse current i r v r = 5 v ? ? 10 a led capacitance c t v = 0, f = 1 mhz ? 15 ? pf off-state current i off v off = 30 v, ta = 50c ? ? 1000 pa detector capacitance c off v = 0, f = 100 mhz, t < 1 s ? 1.0 2.0 pf
TLP3216 3 2004-1-8 coupled electrical characteristics (ta = 25c) characteristic symbol test condition min. typ. max. unit trigger led current i ft i on = 100 ma ? ? 4 ma return led current i fc i off = 10 a 0.2 0.75 ? ma on-state resistance r on i on = 120 ma, i f = 5 ma, t < 1 s ? 10 15 ? isolation characteristics (ta = 25c) characteristic symbol test condition min. typ. max. unit capacitance input to output c s v s = 0 v, f = 1 mhz ? 0.8 ? pf isolation resistance r s v s = 500 v, r.h. < = 60% 5 10 10 10 14 ? ? ac, 1 minute 1500 ? ? ac, 1 second (in oil) ? 3000 ? vrms isolation voltage bv s dc, 1 minute (in oil) ? 3000 ? vdc switching characteristics (ta = 25c) characteristic symbol test condition min. typ. max. unit turn-on time t on ? 50 500 turn-off time t off r l 200 ? (note 4) v dd = 10 v, i f = 5 ma ? 120 500 s (note 4) : switching time test circuit 4 r l v dd v out 3 1 2 i f v out i f t on t off 90% 10%
TLP3216 4 2004-1-8 i f ta i on ta allowable forward current i f (ma) -20 0 20 40 60 80 100 120 0 20 40 60 80 100 allowable on-sate current i on (ma) -20 0 20 40 60 80 100 120 0 40 80 120 160 200 240 ambient temperature ta ( c) ambient temperature ta ( c) i f v f i on v on forward current i f (ma) 0.6 0.8 1 1.2 1.4 1.6 1.8 0.1 1 10 100 0.3 0.5 3 5 50 30 on-sate current i on (ma) -2 -1 0 1 2 -150 -100 -50 0 50 100 150 forward voltage v f (v) on-sate voltage v on (v) r on ta i ft ta on-sate resistance r on ( ? ) -20 0 20 40 60 80 100 0 5 10 15 20 5 trigger led current i ft (ma) -20 0 20 40 60 80 100 0 1 2 3 4 5 ambient temperature ta ( c) ambient temperature ta ( c) ta = 25 c ta = 25 c i f = 5 ma i on = 100 ma t < 1s i on = 120 ma i f = 5 ma t < 1s
TLP3216 5 2004-1-8 t on ,t off i f t on ,t off ta switching time t on ,t off (s) 110100 330 1 10 100 1000 3 3 30 300 switching time t on ,t off (s) -20 0 20 40 60 80 100 0 50 100 150 200 250 forward current i f (ma) ambient temperature ta ( c) i off voff c off v off off-state current i off (pa) 0 10203040 5 10 15 output terminal capacitance c off / c off (0v) 0 1020304050 0.2 0.4 0.6 0.8 1 off-state output voltage v off (v) off-state output voltage v off (v) ta = 25 c v dd = 10 v, r l = 200 ? t off t on t off t on ta = 25 c v dd = 10 v, r l = 200 ? i f = 10 m a ta = 25 c
TLP3216 6 2004-1-8 outline drawing 4.2 3.5 0.15 1.8 0.2 0.2 3.8 0.3 1.4 0.46 ? 0.2 2.04 1.27 1.7 unit << to le rance ? 0.1 : anode : cathode : drain : drain ? the information contained herein is subject to change without notice. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringement s of patents or other rights of the third parties which may result from its use. no license is granted by implic ation or otherwise under any patent or patent rights of toshiba or others. ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their i nherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizi ng toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. ? the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunct ion or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffi c signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. ? the products described in this document are subject to the foreign exchange and foreign trade laws. ? toshiba products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. ? gaas(gallium arsenide) is used in this product. the du st or vapor is harmful to the human body. do not break, cut, crush or dissolve chemically. 030619ebc restrictions on product use
|
